15
2023
-
06
Wire terminals, connectors, connectors, the difference in concept between the three is?
Author：
1、Wiring terminal
For the convenience of wire connection came into being, is used to achieve an electrical connection of an accessory product. Is the metal conductor encapsulated in insulated plastic parts, both ends have a hole that can be inserted into the wire.
As an example, for example, there are two wires, sometimes need to connect, and sometimes need to disconnect, then you can use the terminal to connect them, and can be disconnected at any time, without having to weld them up or wind them together, very convenient and fast.
2、Connector
Also known as connectors connectors, electronic engineering technicians are often in contact with a component. Also known as: plugs, sockets, generally refers to electrical connectors, that is, devices that connect two active devices to transmit current or signals.
3、Connector
Plug-in is a connection to the electronic circuit positioning connector, consisting of two parts of the plug-in and connector, usually they can be completely separated. Plug-in and switch is the same is through its contact state change, to achieve the purpose of the conversion of the connected circuit, the essential difference is that the plug-in only inserted, unplugged in two states, can not be realized in the body of the conversion, while the switch can be realized in the body of the circuit conversion. The contact of the connector has a fixed correspondence.
Related News